LWRC SUPPRESSOR 5.56

S-556 Up to 6mm diameter cartridges (5.56 NATO 6mm ARC etc) - The S-556 has a Wire EDM bore- On rifle suppressors EDM'ing the bore allows for a precise and uniform bore. - Gas Nitrided adds durability for extended firing schedules/greater lifetime of use. - The S-556 is optimized to reduce backpressure/flow gas out of the suppressor and away from the shooter. - The S-556 is a full auto-rated suppressor. This is defined as a suppressor that can withstand the sustained heat and pressure of a firearm in full auto mode. - The S-556 has a C-Series Cerakote coating making it hi-temp rated and ideal for suppressors. - These are all fully-welded to maximize strength/durability. - The S-556 utilizes the QD Flash Hider shipping with a 1/2x28 mount. - CALIBER: Up to 6mm diameter cartridges (5.56 NATO 6mm ARC etc) - LENGTH: 5.125 - WIDTH: 1.75 - WEIGHT: 17.5 oz - MATERIAL: Inconel and stainless steel - ATTACHMENT METHOD: Quick Detach - INTENDED USE: Carbine - WIRE EDM BORE: Yes - REDUCED BACKPRESSURE: Yes - RUNOUT TESTED: Yes - FULL-AUTO RATED: Yes - COATING: C-Series Cerakote - USER-SERVICEABLE: No - FLASH- Internal gas flow and endcap design was built to mitigate flash even on short barrels. - PRECISION- Vented blast chamber and multi-chamber baffle design strips gas away from the projectile as it passed through the suppressor enhancing inherent precision of the system. - BACKPRESSURE- High gas-flow rate blast chamber and baffle design push gas to a vented endcap allowing gases to exit the suppressor with minimal backpressure to the hose rifle